Rescue & Patient Care

CMC Titanium Split-Apart Rescue Litter

Tapered with StratLoad™ Attachment Points

Absolutely the premium choice in basket stretchers whether you are backpacking the litter in or carrying it as standard equipment on a helicopter, the
lightweight Titanium Split-Apart Litter nests for optimum storage and packing in, then assembles quickly. Its nested length is less than 45 in
(114 cm), and it comes with four litter straps.

UL Classified to NFPA 1983 (2017 ED) – Litter
Vertical MBS: 30 (kN)
Horizontal MBS: 14 (kN)

Rescue Litter Specifications:Length: 83 in (211 cm)
Nested Length: 45 in (114 cm)
Width: 23 in (58 cm)
Height: 7.25 in (18.5 cm)
Load Rating: 11 kN (2,473 lbf)
7.3kg

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
C726117		CMC Titanium Split-Apart Rescue Litter	Stock Level: Pre-order Special Order	POA			Add to Favourites

CMC/SKEDCO Drag-N-Lift Harness

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
C721805		CMC/SKEDCO Drag-N-Lift Harness	Stock Level: Pre-order Special Order	POA			Add to Favourites

EZ-Stuff Throwline Bag Set

With its revolutionary design, our exclusive EZ-Stuff™ throw line bag
set stands up and stays open when feeding rope, due to its unique flat
bottom and trademarked side-grommet location. Hang the bag from your PFD
and feed the throwline over your shoulder with the EZ-Stuff bag wide
open for efficient stuffing. The short, stocky design also allows more
room for your hand when feeding rope. The quick-release handle on the
top enables throwing the bag accurately while also allowing it to clip
to your PFD or belt in an upright position. For low-light work, the
Safety-Glo stripe reflects light and glows in the dark for enhanced
visibility. Flotation is built directly into the bag, so no foam disk is
required. The EZ-Stuff Bag contains 50 feet (15 m) of NFPA throwline
for a high-performance, floatable throwline solution for rescue.
567g

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
C291550		EZ-Stuff Throwline Bag Set	Stock Level: Pre-order Special Order	RRP: $249.00	Quantity:		Add to Favourites

Harken Industrial Wingman

Harken’s new WingMan applies new design and technology to achieve more from a compact personal mechanical advantage system. WingMan’s innovative design makes it among the first offerings in this category to achieve internal progress capture mechanically within the unit rather than relying on prusiks to achieve that externally. WingMan combines a ratcheting sheave to stop the rope with a composite handle or wing that the operator can open and close under load for a well-modulated ‘fine-tuned’ release. Under a full load, even with the sheaves pulled completely together, the system can be released quite easily – with full control using one hand on the wing and the other tending the line.

The WingMan has a minimum overall length of just 8 inches which means more clearance under a tripod and more throw during a pick-off. The device is also ideal for creating adjustable directionals, work positioning and much more. It may be configured as a 4:1 or 5:1 mechanical advantage system. These revolutionary features, plus ball bearings within the sheaves that maximize efficiency for raising and lowering loads of up to 681 lbs, makes WingMan a simple tool you will always want at your side. Comes in an industrial-grade ballistic nylon carrying bag with locking buckle. The bag includes drawstring and drain grommets to separate unit and line for proper deployment and line drying.

Construction
The WingMan is a mechanical-advantage device for load lifting and releasing. It is used in a
fall protection or work at height system. It is intended for work at height, access, and rescue
use. It can be used for human suspension for up to a 3 kN load. The WingMan consists of
two swivel pulleys and a manufacturer supplied rope. One pulley is a double with a becket
to dead end the rope. The other pulley is a double with a ratchet and cammed sheave with
a releasing handle allowing gradual release of the mechanical advantage system under
load. The releasing handle is located at the operator end. Anodized aluminum is used
throughout the pulleys. The handle is glass reinforced nylon. The rope is an 8 mm static
polyester with a sewn termination and is not to be substituted.
Pulleys have stainless steel axles and fasteners. The ratchet mechanism is stainless steel.

Features
Internal ratchet and sheaves engineered to maximize rope holding
Eccentric progress capture = no prussiks
4:1 or 5:1 mechanical advantage (flip orientation to rig either way)
Can be released smoothly under full load with one hand
High efficiency ball bearing pulleys and audible progress capture
Machined aluminum swivel connection points fit multiple connectors
Compact, lightweight form factor with 8 inch compressed length
15 m (49 ft) 8mm low elongation HTP rope allows for 3.7 m (12 ft) system extension
Comes in an industrial-grade ballistic nylon carrying bag with locking buckle

Specifications
Max Rated Load: 3 kN (674 lbf)
Slip Load: 4 kN (900 lbf)
Min Breaking Strength: 45 kN (10,116 lbf)
Certifications
NFPA Meets the manufactured system requirements of NFPA 1983, incorporated
in the 2022 edition of NFPA 2500. General Use.
CE H-86666 is CE certified to EN12278.2007 Mountaineering Equipment- Pulley
UKCA H-86666 is UKCA certified to EN12278.2007 Mountaineering Equipment- Pulley
Please see the user manual for additional information regarding these certifications.

Applications
The WingMan provides a multitude of rigging solutions, including:

Personal mechanical advantage
Solo pick-off
Knot passing
Effortless load transfer
Litter attendant position adjustment
High-angle attendant tether
High-angle litter scoops
Establishing dynamic fixed brakes
Pre-tensioned back-ties
Redirect anchors
Load-releasing hitch
Tensioned guying
Correcting equipment orientation under load

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
C720600		Harken Industrial Wingman	Stock Level: Pre-order Special Order	POA			Add to Favourites

Harken LokHead Winch Kit

The Harken LokHead Winch Kit (NFPA Technical Use) is a man-riding portable capstan winch specifically designed for confined space rescue
retrieval or for use with davit systems using an unlimited length of life safety rope. The captive head allows the winch to be used safely,
and keeps the rope from accidentally coming off the winch and releasing. The LokHead Winch Kit comes complete with everything needed for a
tripod setup.
Kit Contents:
Robust stainless steel mounting plate and hardware
Tripod adapter
Winch handle
CMC adjustable strap
2 CMC Auto-Lock Carabiners
Rugged, waterproof carry case

Product Description:
Diverse applications
– The LokHead Winch can be used anywhere a load needs to be lifted and lowered. Rigged to a tripod, like an Arizona Vortex, Sked-Evac tripod,
or most other tripods available, it can be used for confined space rescue, for load moving and hauling, and man-riding
Ergonomic – Easy to rig and efficient, makes the most of the operator’s effort. The winch offers a 40:1 power ratio with 2 gears: high-speed for
light-loads and low-speed for heavy-loads
Operation – Can be driven manually with the provided 25 cm (10″) winch handle or can be used with a power drill
Reliable – The braking system provides descent control and worker protection against free-falls. The encapsulating jaw cover protects fingers and
clothing from catching in the winch
Versatile – Designed for use with life safety rope 10-12.7 mm (5/16-1/2 in) diameter and unlimited line length
Maintenance is easy – Clean and grease regularly as described in the product manual
Maximum Rated Load (MRL) – The max rated load is 500 kg (1,102 lb) for goods/equipment and 220 kg (485 lb) for live rescue loads
Certifications – Meets NFPA 1983 (2017 ED) for Technical Use (“T” Rated), 11mm-12.5mm, MBS 22kN

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
C733500		Harken LokHead Winch Kit	Stock Level: Pre-order Special Order	RRP: $9,347.00	Quantity:		Add to Favourites

Harken Traction Winch 500

A lightweight, CE certifi ed, portable winchThe Rigging Winch provides the user with a lightweight, CE certifi ed,
portable winch mounted to a robust adapter plate. The 2-speed 500 model weighs
just 7 kg (15.4 lb). Its maximum working load of 4.9 kN (1102 lb) maximizes
operator pulling power by up to 40 times. Multiple mounting options provide
versatility when working in challenging or remote environments.
Design
The mounting plate is sculptedto remove excess weight and provides multiple attachment
points without compromising strength. The pigtail lead ensures correct alignment and loading of
the winch for maximum efficiency.
Fiber rope
The winch is designed for use with fiber rope up to 12 mm(1/2") in diameter, reducing
weight and allowing alignment to the load. Smooth surfaces and chafe-free design reduces rope
wear. The unique drum design maximizes grip on the rope.
Winch
Winches feature 17-4 PH stainless steel load-carrying gears and pins for strength and durability. Packages
include a universal mounting plate, 10" winch handle, and the two-speed Rigging Winch 500
Options
For use with multiple attachments, depending on the environment and industry: ratchet straps, M10 bolts,
carabiners, and scaffold clamps.
Weight (lb) 13.2 lb
Maximum line Ø (mm) 12 mm
Maximum line Ø (in) 1/2 in
Minimum line Ø (mm) 8 mm
Minimum line Ø (in) 5/16 in
Weight (kg) 6 kg
Power ratio with 254 mm/10" winch handle 13.5:1/39.9:1
Maximum working load (kN) 4.9 kN
Maximum working load (kg) 500 kg
Maximum working load (lb) 1102 lb

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
C733511		Harken Traction Winch 500	Stock Level: Pre-order Special Order	RRP: $3,540.00	Quantity:		Add to Favourites

Head End Litter 68" 7mm Cord

The Head-End Litter Spider is used in sets of 2 and attach from the head-end of the litter to the haul
point. These cords are set-up as prucells to allow for adjustment on steep angle evacuations.
7 mm x 68" sewn in a bound loop.
MBS Rating (kN) 17.0

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
CP68		Head End Litter 68" 7mm Cord	Stock Level: In Stock Special Order	RRP: $75.00	Quantity:		Add to Favourites

K9 Proseries Rappel Harness

Designed to be a quick-donning, lightweight harness that the handler can pack into the field, the K9 ProSeries Rappel Harness features rugged
Cordura® nylon panels on the outside and breathable D3 cloth on the inside. Designed to not open when loaded, the harness features
(5) ANSI-rated aluminum Cobra buckles that are extremely quick to connect and disconnect. Two-inch web straps securely support your dog
during rappels and hoists. A large molded rubber handgrip makes it easy to lift, position and control your dog during the evolution. A stowaway
rear-lift assembly fits around the dog’s rear legs for additional security. The soft loop main connection point suspends the dog in a
comfortable position. Features a rear attachment for lead connection and elastic loops to secure a light stick. Extensively tested, proven and
trusted worldwide by K9 teams for comfort, security and ease of use. One size will fit most rescue/tactical-use canines.
PRODUCT WEIGHT 2 LB 1 OZ (930 G)

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
C890255		K9 Proseries Rappel Harness	Stock Level: Out of Stock	RRP: $1,400.00	Unavailable for Online Purchase		Add to Favourites

NRS Rapid Rescuer PFD Yellow

Type V PFD. 22 lbs of flotation, adjustability to fit chest sizes from
30 to 58 inches, and all the features you will ever need in a rescue
vest. The NRS Rapid Rescuer can handle any situation.

-With box-stitched stress points, reinforced shoulder straps
and a 500-denier Cordura® shell, the NRS Rapid Rescuer is tough enough
to handle any situation.
-Two huge front pockets stretch to hold anything from a GPS to a
VHF. Quick release buckles with adjustable nylon webbing secure the
pockets shut.
-Quick-release rescue belt, with stainless steel ring, for "live bait" and other swiftwater rescue techniques.
-Three lash tabs on the front are great for a knife, whistle or anything else you need to keep handy.
-On the back there's an additional lash tab for a strobe, and a
chem-light holder, for visibility in low light and night operations.
-Long strips of reflective tape on the front and back of the jacket increase visibility.
-Webbing loops for leg straps add extra security in big water. (Leg Straps sold separately).Universal Plus sizing will fit chest sizes between 30 and 58 inches, with 8 adjustment points to ensure a secure fit.This jacket carries the US Coast Guard Certification, through testing by Underwriters Laboratories (UL).
Weight: 3.75 lbs.
US Coast Guard Type: V
Profile: High
Design Flotation: 21.9 lbs.
Outer Fabric: 500-denier Cordura®

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
C470149Y		NRS Rapid Rescuer PFD Yellow	Stock Level: Out of Stock	POA			Add to Favourites

Rescue Manikins

The official manikin of the Firefighter Combat Challenge, Simulaids manikins are the best way to maintain the reality of rescue training
without using a live subject. Fully articulated, Rescue Randy can be positioned in every conceivable situation. The head and body are built
of dense, flexible, life-like vinyl that is rugged and waterproof. The 18.7 kN (4,200 lbf) breaking strength stainless steel cables are coated.
Rescue Randy I.A.F.F. has additional reinforcement for even greater durability. Rescue Jennifer is 122 cm (4 feet) tall, equivalent to a 7-
to 12-year-old child. The Water Rescue Randy was developed for YMCA water safety courses and allows adjustment to its buoyancy by adding
weight to the abdomen section. It weighs 18 kg (40 lb) on land but will sink with about 4.5 kg (10 lb) of added weight.
Product/ Weight MANIKIN, RESCUE RANDY 74.8 kg (165 LB)
Height 165 cm (5 ft 5 in)
Shipping Weight 83.9 kg (185 lb

Special Order only - not carried in stock. Please contact us for availability

Code	Product Name	Stock Level	Price	Wishlist
C781345	Rescue Randy Combat Challenge 75kg	Stock Level: Out of Stock	POA	Add to Favourites
C781475	Rescue Randy IAFF 75kg	Stock Level: Out of Stock	POA	Add to Favourites
C781477	Rescue Randy IAFF 80kg	Stock Level: In Stock	POA	Add to Favourites

Rock Empire Alpha Rescue Triangle

The evacuation triangle ALPHA
with shoulder straps is designed primarily for evacuation of
individuals when using special rope techniques. The evacuation triangle
ALPHA is made of an elastic material, which guarantees a snug fit around
the evacuee. During an evacuation, this fit allows for comfort, safety
and an increased secure feeling for every evacuee from small children to
full grown adults.

Different loop colors allow for selecting the optimal size quickly
and easily in every situation and the triangle has adjustable shoulder
straps.Evacuation triangle ALPHA can easily be packed into the pocket sewn
on the triangle and, once packed, it is a small compact package that
easily clips on to a rescuer´s harness.The elastic material ensures easy handling of the evacuation
triangle ALPHA even at low temperatures, when other materials can harden
and become inflexible.The materials used in the ALPHA gives it an outstanding low weight.Only for rescue purposes.(EN 1498; EN 1497).

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
7318		Rock Empire Alpha Rescue Triangle	Stock Level: In Stock	RRP: $255.00	Quantity:		Add to Favourites

SKED Basic Rescue System

Compact storage, ease of use, and flexibility in transport have made Skedco’s Sked® stretcher popular with fire departments, rescue squads, the military,
and ski patrols. Made from a heavy sheet of plastic, the stretcher becomes rigid when folded around your patient. A variety of handles and
straps allows the stretcher to be transported by carrying, lifting (vertically or horizontally) by rope systems or helicopter, or towed
with the stretcher sliding on the smooth bottom surface. The system comes complete with the stretcher, Cordura® nylon
backpack/towing harness, two straps, horizontal lift slings, vertical lift sling, one large steel carabiner, and four removable web handles.
The Sked storage bag is 36 inches (91 cm) long by 9 inches (23 cm) in diameter.
PRODUCT WEIGHT 8.2 KG

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
C752001		SKED Basic Rescue System	Stock Level: Pre-order Special Order	RRP: $1,599.00	Quantity:		Add to Favourites

SKED Basic Rescue System with Cobra Buckles

Skedco now offers the patented AustriAlpin Cobra™ quick-release buckles on the Sked® stretcher. These lightweight aluminum side-release buckles are
dependable and strong enough to meet the needs of securing a patient into a Sked stretcher without the danger of breakage. The buckles are
rated at 3,000 lbs. and are difficult to release while under tension. By using the Cobra buckle system, you will no longer have to weave the
webbing through the buckles when packaging a patient, therefore patient packaging is often done in about half of the time as when using the
original steel buckles.

Compact storage, ease of use, and flexibility in means of transport have made Skedco’s Sked stretcher
popular with fire departments, rescue squads, the military, industrial response teams, and ski patrols. Made from a heavy sheet of special
plastic, the stretcher becomes rigid when folded around your patient. A variety of handles and straps allows the stretcher to be transported by
carrying, lifting (vertically or horizontally) by rope systems or helicopter, or towed with the stretcher sliding on the smooth bottom
surface. The system comes complete with the stretcher, Cordura® nylon backpack/towing harness, two straps, horizontal lift slings,
vertical lift sling, one large steel carabiner, and four removable web handles. The Sked storage bag is 36 inches (91 cm) long by 9 inches (23
cm) in diameter.
PRODUCT WEIGHT 8.6 KG

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
C752201		SKED Basic Rescue System with Cobra Buckles	Stock Level: Pre-order Special Order	RRP: $2,223.92	Quantity:		Add to Favourites

SKED Evac Aluminium Cobra Buckle Conversion Kit

Skedco now offers a complete conversion kit that includes six patented AustriAlpin Cobra™ quick release buckles. These lightweight aluminum
side-release buckles are dependable and strong enough to meet the needs of securing a patient into a Sked® stretcher without the danger of
breakage. The buckles are rated at 3,000 lbs. and are difficult to release while under tension. By using the Cobra buckle system, you will
no longer have to weave the webbing through the buckles when packaging a patient, therefore patient packaging is often done in about half of the
time as when using the original steel buckles. The Cobra buckle straps girth-hitch onto the Sked stretcher for quick and easy installation.
PRODUCT WEIGHT 91 KG (2 LB) COLOR BLACK

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
C752060		SKED Evac Aluminium Cobra Buckle Conversion Kit	Stock Level: Pre-order Special Order	RRP: $638.00	Quantity:		Add to Favourites

SKED Stretcher Floatation System

The flotation system for the Sked Stretcher maintains the patient in a nearly vertical position. It is designed so that a patient in the water
can be loaded into the stretcher. Self-righting, it will keep the patient’s head above water even in rough seas. The Flotation System fits
both full-size and pediatric Sked Stretcher models.
Product Weight 2 lb 9 oz (10.2 kg)
Color Orange

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
C756001		SKED Stretcher Floatation System	Stock Level: Pre-order Special Order	POA			Add to Favourites

Skedco Oregon Spine Splint II

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
C753001		Skedco Oregon Spine Splint II	Stock Level: Pre-order Special Order	POA			Add to Favourites

SLIX 100 Stretcher

A robust, compact and lightweight stretcher. The flexible material combined to a smooth finish allows easy sliding and permits the stretcher to be rolled width ways or lengthways to facilitate transport. No webbing passes under the stretcher preventing damage whilst dragging. Strong handles around the stretcher allow it to be maneuvered by several rescuers. The stretcher may be hauled vertically or horizontally. The lifting strops secure and allow the stretcher to mould around the casualty.The Abtech Stretcher may be used with the Abtech Two Person Tripod for confined space rescue.Product Code:
SLIX100KITConformance:
CE 93/42/EEC CLASS 1Max Recommended User Weight:
400KGWidth - 915mm
Length - 2300mm

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
7319		SLIX 100 Stretcher	Stock Level: Out of Stock	RRP: $2,878.00	Unavailable for Online Purchase		Add to Favourites

SRT Throwline per foot

Developed for swiftwater rescue technicians needing the versatility
of a throwline with a larger diameter for a better grip, the SRT
Throwline is supple enough to fit into a compact throw bag, but has
extra strength and is easy to grip when setting tension diagonals or
boat lines. The polypropylene core and protective nylon sheath
combination produces a strong, supple, highly visible river rescue rope
that floats.Rope is sold by the foot. Please contact customer support for maximum length available.Throwlines: A Safe Choice

A throwline bag is the safest way to reach a subject in fast-moving or
still water. It provides a downstream safety backup when rescuers must
enter the water. Throwline bags should be kept in patrol cars,
ambulances, and other emergency response vehicles.
13kN 9.5mm 1.8kg/100ft

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
C292957		SRT Throwline per foot	Stock Level: In Stock Special Order	RRP: $2.45	Quantity:		Add to Favourites

Summit Bothy Bag

Bothy Bag 2 Person Group Survival Shelter
Bothy Dim: 1.20(L) x 0.65(W) x 1.10(H)
Stuff Bag: 11.5cm Diam/18cm Long
Bothy Shelter: 344 gm
A durable product suitable for repeated use.
Life time Guarantee
Attached Stuff Bag
RPtex PU waterproof fabric
Seating Accom
Integral Window
Two velcro air vents 30cm approx
Nylon draw cord round the base
Loops at corners for walking poles
Colours Vary

Code	Product Name	Stock Level	Price	Quantity	Wishlist
TNB	Summit 15 Person Bothy Bag	Stock Level: Out of Stock	RRP: $450.00	Unavailable for Online Purchase	Add to Favourites
TNBB2	Summit 2 Person Bothy Bag	Stock Level: In Stock	RRP: $179.00	Quantity:	Add to Favourites
TNBB4	Summit 4 Person Bothy Bag	Stock Level: In Stock	RRP: $209.00	Quantity:	Add to Favourites
TNBB8	Summit 6-8 Person Bothy Bag	Stock Level: In Stock	RRP: $245.00	Quantity:	Add to Favourites
TNBB10	Summit 10+ Person Bothy Bag	Stock Level: In Stock	RRP: $279.00	Quantity:	Add to Favourites
TNBB20	Summit 20 Person Bothy Bag	Stock Level: Out of Stock	RRP: $485.00	Unavailable for Online Purchase	Add to Favourites

Summit Supalite Bothy Bag

This shelter has been stripped of all features but the following crucial ones remain
Dimensions 1.20 (L) x 0.65 (W) x 1.10 (H)
Stuff Bag: 9 cm Diam/11cm long approx
Bothy Bag weight: 265gm approx
Designed for cyclists, fell runners and mountaineers who want the effectiveness of a shelter using a supalite fabric and without the
added weight of comfort features
Very compact and lightweight, with sufficient height to sit on the edges to fix the shelter
Ripstop Silicone coated ultra lightweight fabric
Nylon draw cord round the base
Attached Stuff Bag
12 inch velcro air vent
Double stitched seam
No window in Supalite to save weight and volume – pvc windows are heavier and bulkier to pack
Colours Vary

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
TNBS2		Summit Supalite 2 Person Bothy Bag	Stock Level: In Stock	RRP: $235.00	Quantity:		Add to Favourites
TNBS4		Summit Supalite 4 Person Bothy Bag	Stock Level: In Stock	RRP: $285.00	Quantity:		Add to Favourites

Survival Bag

Made from the same aluminium foil as the survival blankets.These sleeping bags are a great form of protection from the elements. Water and wind resistant, excellent thermal retention, perfect for use in conjunction with survival blankets.
91cm x 213cm

Code	Image	Product Name	Stock Level	Price	Quantity	Quote	Wishlist
010B		Survival Bag	Stock Level: Out of Stock	RRP: $15.00	Unavailable for Online Purchase		Add to Favourites

Shopping Cart

Search

Shop Now

Rescue & Patient Care